Welcome to our Webshop / products We have a large selection and not all of our products are in the Webshop If you do not find what you are missing, you are welcome to contact us by mail Write to us

PCV20 Programmable multi-range signal converter and isolation amplifier. Galvanic separation between supply, inputs and outputs Input: AC/DC current input from 15 µA to 10 A AC/DC voltage input from 10 mV to 1000 VAC/1500 VDC Frequency of input. Up to 10 kHz Output, can be configured within the following areas: 0 to 20 mA. Max. external load: 500 Ohm -10 to +10 V. Min. external load: 1000 Ohm pulse outputs 0 to 10KHz Supply 24VDC

SC05 Programmable signal converter Converts temperature (mV) signals to a 4-20 mA output Input for PT100, PT1000, PTC, Thermocouple and mV Analogue output 4-20mA Accuracy 0.2% of full scale 7-30VDC supply Remember to state what it is to be programmed for. If you do not have the opportunity to do this yourself

HSR16 Humidity sensor or a combined temperature and humidity sensor 2-wire measurement of air humidity and temperature 2 independent loop powered circuits 4-20 mA current loop proportional to humidity and temperature. Working temperature: -20 °C to +70 °C

FPA38 Transmitter for kW, 3-phase symmetrical load Can be connected to 3-phase mains up to 3 x 500 VAC Measures total power consumption (?3 x U x I x cos phi) Built-in current transformer, range selection up to 60 AAC Analog output 0-20 mA / 4-20 mA Galvanic separation between input and output

Here you will find ours NAMUR-sensor Namur sensors

RP10 Monitoring relay for 1-phase supply voltage Monitoring of 1-phase supply voltage Separate adjustment of min. and max. limits 1-2 pole relay output Supply: Select variant

RP30 Monitoring relay for 3-phase supply voltage without time delay monitors phase-neutral voltages monitors phase-phase voltages Separate adjustments for minimum and maximum levels 1-pole relay output 8 A / 250VAC Supply phase-phase: Select variant

RP31 Phase sequence and voltage asymmetry Monitoring relay for 3-phase supply voltage Monitors 3-phase voltage asymmetry Checks correct phase sequence 1- or 2-pole relay output AC supplies up to 3 x 415 VAC

RP32 Phase sequence and phase break monitoring of 3-phase supply voltage Checks correct phase sequence Protects against phase failure 1- or 2-pole relay output AC supplies up to 3 x 415 VAC

RP33 Monitoring relay for 3-phase supply voltage With time delay monitors phase-neutral voltages monitors phase-phase voltages Built-in adjustable time delay Adjustment for minimum levels Adjustment for maximum levels 1-pole relay output 8A / 250VAC Supply: Select variant

RP81 Load monitor for 3-phase motors Measures power factor (cos phi) Adjustable time delay 0-20 sec. at startup Selectable relay dropout in case of overload or underload 1-pole relay output

Here you will find our PT100/PT1000 sensor PT100/PT1000 - temperature sensors    

Here you will find our B-heads sensor and accessories for B-heads B-heads sensor and accessories for B-heads

Here you will find our Thermocouples Thermocouples

PT1000 sensors with cable steel braid/silicone - choose variant

Here you will find our PTC/NTC temperature sensors PTC/NTC temperature sensors

Termotech div. loose parts and accessories for B heads

Comadan color tester is not a physical product and not for sale

Comadan C-mac Blue tester The color is blue This is web testware that is not for sale

Comadan C-mac Flower tester The color is flowers This is web testware that is not for sale

Comadan C-mac Red  tester The color is Red This is web testware that is not for sale

Comadan C-mac purple tester The color is purple This is web testware that is not for sale

Thermotech thermoweels Ø11x285 mm 1/2 RG female thread and 1/2 RG male thread -80°- 600° AISI 316

TERMOTECH PT100 B head Available in various lengths 1/2 RG temp. -80+600°C IP54

Thermotech thermoweels Ø11X115 mm 1/2 RG female thread and 1/2 male thread -80°- 600° AISI 316

Thermotech thermoweels Ø11X135 mm 1/2 RG female thread and 1/2 male thread -80°- 600° AISI 316

TERMOTECH PT100 B head with cooling neck pipe Available in various lengths 1/2 RG temp. -80+600°C IP54

TERMOTECH sensor pipe for B heads With and without cooling neck available in different lengths

Here you will find ours PNP-inductive sensors PNP- inductive sensors

Here you will find ours Rectangular and various sensor Rectangular and various Sensor

Type J temperature sensor with steel braid

Type K temperature sensor with steel braid

PT100 sensor with 4-pole M12 plug connection Diameter: Ø8 Thread: ½” RG Working temperature: -40-250°C

PT100 sensors with 2 wire silicone cable -40- 200°C -choose variant

PT100 sensors with 3 wire silicone cable -40-200°C choose variant

PT100 sensors with 4 wire silicone cable -40-200°C choose variant

Ring-shaped PT100 sensor with hole for mounting select variant